« previous next »
Pages: [1]

Author Topic: a yes or no question  (Read 3020 times)

Offline Ar-Bandit

  • Board Homesteader!
  • ***
  • Posts: 69
    • http://www.arkansasextremes.com
a yes or no question
« on: December 21, 2006, 08:57:32 PM »
All I need to know is if the bandit 2002 bandit 1200 arm will fit the 2002 bandit 600 with no probelm or any other work to the arm.
Logged
On a Swedish chainsaw --
"Do not attempt to stop chain with your hands or genitals."
(Oh my Word..was there a lot of this happening somewhere?)

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
a yes or no question
« Reply #1 on: December 23, 2006, 12:16:05 AM »
Never had a 600, so I couldn't tell you.  Why do you want to switch?
Logged
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline Ar-Bandit

  • Board Homesteader!
  • ***
  • Posts: 69
    • http://www.arkansasextremes.com
hey
« Reply #2 on: December 23, 2006, 05:42:07 PM »
its not that I'm wanting to switch them for a real reason its just that I need a new arm for my bike and all and I can't find a 600 and can only find 1200 arms and I need to get them changed out
Logged
On a Swedish chainsaw --
"Do not attempt to stop chain with your hands or genitals."
(Oh my Word..was there a lot of this happening somewhere?)

Offline gearset01

  • Board Homesteader!
  • ***
  • Posts: 128
Part numbers rarely lie
« Reply #3 on: December 24, 2006, 10:31:46 AM »
Go to Ron Ayers site and go to the Microfichs and check part numbers !!!!!
PIN
Logged

Offline MrBAMcClain

  • Board Homesteader!
  • ***
  • Posts: 62
a yes or no question
« Reply #4 on: December 24, 2006, 04:04:15 PM »
YES...
 
Get the swingarm, wheel axel and spacers and brake stay from the 1200 and mount it. No mods needed.
Note: You NEED the axel and spacers. May as well run the bigger tire if you can get the whole setup for cheap.

Here's an old pic when I was modding my 600 with the 1200 swingarm and 600 wheel.


Logged
Pages: [1]
« previous next »