« previous next »
Pages: [1] 2 3

Author Topic: Another Busa Fork Conversion Post!  (Read 14728 times)

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Another Busa Fork Conversion Post!
« on: March 25, 2009, 12:40:02 AM »


Stripped, prepped and painted the new Busa wheel Sunday!




The Galfer rotors were a tease they were off my buddies ZRX to bad they wont fit I ended up getting a set off a TL 1000!


Put her up on the lift and got her ready for the Busa forks!





Machined down a bronze bushing for the Busa upper tripple to accept the Bandit stem today! What's the moto measure once machine three times?





Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Cruisecontrol

  • Board Homesteader!
  • ***
  • Posts: 203
Re: Another Busa Fork Conversion Post!
« Reply #1 on: March 25, 2009, 07:08:12 AM »
Awesome stuff!

Once you get rid of the stock front end it becomes a whole new bike.
Logged

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #2 on: March 25, 2009, 08:41:06 AM »
Quote from: Cruisecontrol on March 25, 2009, 07:08:12 AM
Awesome stuff!

Once you get rid of the stock front end it becomes a whole new bike.

Yea, I thought the Busa rear shock and race tech front springs made a difference I can't wait to try this set up! :beers:
Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: Another Busa Fork Conversion Post!
« Reply #3 on: March 25, 2009, 01:35:07 PM »
sweet thread, keep us updated how it goes. Hope to put my own busa forks in within the next month or two. While the snow still flies  :banghead:
why did you go with a bronze bushing? (i haven't decided on materials yet so am looking for any good hints)
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: Another Busa Fork Conversion Post!
« Reply #4 on: March 25, 2009, 02:10:15 PM »
turns out I have more questions... what fender will you use?
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #5 on: March 25, 2009, 04:22:28 PM »
Quote from: mademiriam on March 25, 2009, 01:35:07 PM
sweet thread, keep us updated how it goes. Hope to put my own busa forks in within the next month or two. While the snow still flies  :banghead:
why did you go with a bronze bushing? (i haven't decided on materials yet so am looking for any good hints)

Because that's what I had? :trustme:
Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #6 on: March 25, 2009, 04:24:42 PM »
Quote from: mademiriam on March 25, 2009, 02:10:15 PM
turns out I have more questions... what fender will you use?

If I go with one I'll end up with one off a GSXR 600/750, some dude over at the other board put one on his bike with some minor mods looked sweet!
Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: Another Busa Fork Conversion Post!
« Reply #7 on: March 25, 2009, 05:32:13 PM »
 :grin: Ironic I've been looking at getting a gsxr one as well (but maybe making it a bit smaller) id love to see a pic though. any chance you got a link to that other board?
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #8 on: March 25, 2009, 08:35:49 PM »
Quote from: mademiriam on March 25, 2009, 05:32:13 PM
:grin: Ironic I've been looking at getting a gsxr one as well (but maybe making it a bit smaller) id love to see a pic though. any chance you got a link to that other board?

http://www.maximum-suzuki.com/forums/index.php/topic,70130.msg784343.html#msg784343
Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #9 on: March 25, 2009, 09:14:44 PM »
OK corrected the ID on the bushing and did the fitting & things seem to be good to go!





Damn I wish I would  have not got rid of my press so I could swap out the stems and why the hell did they put those tamper proof torx in the ignition switch got the correct one but it won't budge Freaking Loctite! Perhaps a little Heat!
« Last Edit: March 25, 2009, 09:17:41 PM by Mongo »
Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #10 on: March 26, 2009, 11:18:33 PM »
Swapped out the Bandtit stem into the Busa lower, now I need to get to work on the stops!

Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Cruisecontrol

  • Board Homesteader!
  • ***
  • Posts: 203
Re: Another Busa Fork Conversion Post!
« Reply #11 on: March 27, 2009, 05:54:55 AM »
Stops?

That is what the oil cooler is for!
Logged

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #12 on: March 28, 2009, 08:30:03 PM »
Stripped the lower end of the Busa forks today!





Set up the new steering stops, I really did not want to use my oil cooler!



Mounted the bars and started fitting the new gauge mount!



That's about as far as I got today need to swap the tire install the new bearings & and seals to the wheel and mount the head light turn signals etc. etc. etc.

Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline Mongo

  • Board Homesteader!
  • ***
  • Posts: 496
Re: Another Busa Fork Conversion Post!
« Reply #13 on: March 29, 2009, 11:03:42 PM »
Work slowed today after my 6 mm allen stripped making it a bitch to get the bolts out of th Bandit rotors  :banghead: (recycled to the Busa wheel) a trip to Sears problem solved. Then a trip across town to swap out the tire (Thanks Erik :thumb:).

Got home and started putting the little Beotch back together when my Buddy Turbo Bob showed up and noted the drag on the brakes after an hour of shimming the calipers she freed up a enough to take out for a ride once I finish putting her together?



Logged
02 1200 Fighter
Do chickens fly? Yea and a Hell of a lot faster than reindeer!!!!

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: Another Busa Fork Conversion Post!
« Reply #14 on: March 30, 2009, 11:42:16 AM »
looks great thanks for the writeup
Logged
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike
Pages: [1] 2 3
« previous next »