B600 Carb centres dimensions ?

[bstard]

Hi
I have a GS1200SS and as it is a Jap model it runs Keihin CRV32's
Apparently the B600 also has these carbs.
So I want to lose the airbox and run KN pod filters.
Can anyone confirm me the distance between carbs on the CRV32's...the centre distance.
Also I measured the bell month on mine at 50mm OD.
Can someone confirm that as well?

I see that the KN RU-2922 is recommended for the B600...but they have a Flange Inside Diameter: 2.375 in (60 mm) and Flange Center to Center: 3 in (76 mm)

Can anyone confirm that those filters fit the CRV32's ?

Thanks
Richard

[bstard]

Hi
Well I got my CRV32.s off and here are those dimensios for anybodys futer reference.Remember this is from a 2004 GS1200SS Japanese model.
Carb bellmouths at airbox side are 50mm OD
Carb spigots at engine side are 38mm OD
Carb centres are...outer carb to inner carb are 82mm
Carb centres are...inner carb to inner carb are 86mm

This is the closest KN Pod filters that I can find that come close to matching the CRV dim's
RC2282http://www.knfilters.com/search/product.aspx?Prod=RC-2282

Hope this info is of use to someone.
Thanks
Richard