Author Topic: bandit 1200 speed  (Read 11807 times)

Offline rspector

  • Board Homesteader!
  • ***
  • Posts: 51
bandit 1200 speed
« on: May 11, 2006, 03:40:08 PM »
does any one think a bandit with 150 hp could break 150 mph?

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
bandit 1200 speed
« Reply #1 on: May 11, 2006, 03:46:06 PM »
I would say... easily.

A piped & jetted 1200 should be able to do 150 or very close to it.  And that's only about 120hp


Offline rspector

  • Board Homesteader!
  • ***
  • Posts: 51
bandit 1200 speed
« Reply #2 on: May 11, 2006, 03:54:58 PM »
i am having a disagreement with a guy who says he's got a cammed,jetted,piped b1200 and he cant hit 150, I think its bull s***t. But I have been wrong before ;) (just not often)

Offline DaveG

  • Board Homesteader!
  • ***
  • Posts: 151
bandit 1200 speed
« Reply #3 on: May 11, 2006, 04:22:07 PM »
nope, he should have not problem
stock can do an actual 146 the speedo probably says 160

Offline chevsuz12

  • Board Homesteader!
  • ***
  • Posts: 249
bandit 1200 speed
« Reply #4 on: May 11, 2006, 04:23:08 PM »
Maybe not 150mph on a 1/4 mile dragstrip, but on an open road, I can't imagine it not, unless it is unfaired, and he weighs about 500 pounds, and has geared it down, and strapped bricks on the passenger seat, and it is running on 3 cylinders, with flat tires.
B12 Streetfighter!

Offline kedeg_97B12

  • Board Homesteader!
  • ***
  • Posts: 169
bandit 1200 speed
« Reply #5 on: May 11, 2006, 04:45:27 PM »
Quote from: "rspector"
i am having a disagreement with a guy who says he's got a cammed,jetted,piped b1200 and he cant hit 150, I think its bull s***t. But I have been wrong before ;) (just not often)


That's OK, my neighbor struck up a converstation about Buells. He said "You crotch rockets ain't got nuthin on those Buells, they're bad ass" :duh:

No doubt one is probabally faster than me in the corners but that ain't saying much.

I have seen the stock 170mph speedo pegged on mine and my digital speedo read 153 at the time. I weigh 315 and have the frontal area of a motorhome.
97 1216 Big Bore, Gixxer intake, with
Holeshot commemorative figurine with kung fu grip, Red
12 volt Dewalt drill, Yellow,
Moen bathroom faucets, Chrome

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
bandit 1200 speed
« Reply #6 on: May 11, 2006, 04:46:41 PM »
I do 139 in the 1/4, can easily do 170, maybe even 180, with 155 RWHP.
If I didn't have a Suzuki, I would have a Kawasaki

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
bandit 1200 speed
« Reply #7 on: May 11, 2006, 05:08:54 PM »
A bone-stock B12 should hit 150mph.

If he can't, either he's geared it down or something's wrong.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline rider123

  • Board Homesteader!
  • ***
  • Posts: 991
bandit 1200 speed
« Reply #8 on: May 12, 2006, 07:57:50 PM »
bone stock acording to MCN a 2001 hit 151 MPH average. Considering the bike is a bit overgeared I'm sure you could hit 155-160 with a jet kit and pipe.
2005 Bandit 1200, Modified Holeshot Stage 1 with 17.5 pilots 2.75 turns out, and 110 mains 5 shims. Muzzy Slip on w/mid-pipe, stock filter. 1.5" hole in the airbox lid.

Offline CWO4GUNNER

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1199
    • GUNNER G. CWO4 WEPS USCG Retired
bandit 1200 speed
« Reply #9 on: May 12, 2006, 08:27:11 PM »
:clap:

Offline kedeg_97B12

  • Board Homesteader!
  • ***
  • Posts: 169
bandit 1200 speed
« Reply #10 on: May 13, 2006, 12:52:00 AM »
Quote from: "CWO4GUNNER"
I have an 05 B12 purchased in Nevada and had no problem getting up to 140 but am planning to get a Nikko G-pack module cause I heard that at 150 the bike's speed and rev limiter will kick in and prevent the bike from going past 150. Any one knows if this is true.


Nope it is drag limited, meaning she don't got the power or gearing to go faster in stock form. A stock B12 will not pull redline in 5th gear.
97 1216 Big Bore, Gixxer intake, with
Holeshot commemorative figurine with kung fu grip, Red
12 volt Dewalt drill, Yellow,
Moen bathroom faucets, Chrome

Offline britxbike

  • Board Regular!
  • **
  • Posts: 18
bandit 1200 speed
« Reply #11 on: May 13, 2006, 12:57:26 AM »
My speedo might be wrong but I did 150MPH the other night with a little room to go. I'm talking bone stock here, am I missing something?
01' 1200s GO HUSKERS!

Offline chevsuz12

  • Board Homesteader!
  • ***
  • Posts: 249
bandit 1200 speed
« Reply #12 on: May 13, 2006, 01:41:47 AM »
Yeah Britxbike, your missing the roughly 10% error that your speedometer has!  At indicated 150 you are propably truly going about 135mph.  Get a GPS and verify it.
B12 Streetfighter!

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
bandit 1200 speed
« Reply #13 on: May 13, 2006, 12:12:22 PM »
Quote from: "CWO4GUNNER"
I have an 05 B12 purchased in Nevada and had no problem getting up to 140 but am planning to get a Nikko G-pack module cause I heard that at 150 the bike's speed and rev limiter will kick in and prevent the bike from going past 150. Any one knows if this is true.


For the B12, the Nikko G-Pack is a waste of money. The only thing it does on the B12 is eliminate the timing change in lower gears on Euro models. The same thing can be accomplished on these bikes by snipping a wire that tells the black box what gear the bike is in. US & CDN models don't even have this wire. (Not sure about other markets, like Japan or Down-Under models.) It may be a worthwhile product in other applications, I don't know... but not worth it for Bandits.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline flipbandit

  • Board Homesteader!
  • ***
  • Posts: 103
600
« Reply #14 on: May 13, 2006, 01:00:57 PM »
i have a b6 and have hit 130 - 133mph i got scared haha
that's having less than 80 ponies.
im 125 pounds.
put me on the stock b12 i'll probably go 160 - 170 or more haha

 :monkeymoon:

not that i would, i'd be scared shitless.
(",)