« previous next »
Pages: [1]

Author Topic: With blocking the pair system do you need to rejet?  (Read 2766 times)

Offline mikenj

  • TURBO TYPER!
  • **
  • Posts: 30
With blocking the pair system do you need to rejet?
« on: October 30, 2012, 03:54:27 PM »
  I got a 100% stock bike and want to lighten and clean it up some. If I block the pair, do I need to rejet? Also notice the foot pegs are HEAVY! Anyone install light weight aluminum ones?



Logged

Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: With blocking the pair system do you need to rejet?
« Reply #1 on: October 30, 2012, 03:58:39 PM »
No need to re-jet with the PAIR removal.  I did the poor man's version and simply plugged off the hoses.  Not quite as clean but much easier to do.
Logged
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline mikenj

  • TURBO TYPER!
  • **
  • Posts: 30
Re: With blocking the pair system do you need to rejet?
« Reply #2 on: October 30, 2012, 04:19:12 PM »
Thanks for the fast reply! I'm going to make my own block off plates out of aluminum and remove it all.
Logged
Pages: [1]
« previous next »