Author Topic: Muzzy.....Fuzzy or Fun? (Read 5713 times)

rider123 · « **on:** December 19, 2005, 04:19:12 PM »

I've been doing a search here and not many people here I can see have a Muzzy slip on. I just bought an Aluminum Muzzy slip on with mid pipe for $204 new in box on Ebay. I know Muzzy for the Kawi's are highly recomended. It seems not too many people here have the Muzzy slip on solution for the 2G Bandit. Can anyone tell me about them? Sound levels, horsepower gains, fit and finish? It looks good brand new in the picture but it's hard to guage by just a small 3 inch by 4 inch picture. I plan to either get a Holeshot or Ivan's kit with this pipe. Anybody have this puppy? Is it "fuzzy" or "fun"?

rider123 · « **Reply #1 on:** December 19, 2005, 06:34:28 PM »

In case anyone is wondering what it looks like:

and

Vee Dub Nut · « **Reply #2 on:** December 19, 2005, 07:21:59 PM »

I would imagine that its similar to most cans... not really sure on the specifics though....

B12Teuton · « **Reply #3 on:** December 20, 2005, 09:13:29 AM »

I can't imagine Muzzy making a crap pipe.
I'm sure it will work well and last long. Can't speak to how loud it is (or isn't).

You can't go wrong with either Ivan's or Holeshot jet kit. I liked Ivan's.

rider123 · « **Reply #4 on:** December 20, 2005, 10:34:56 AM »

Well I guess I'm the guinea pig. I'll post some better pics and maybe a sound byte or two if I can get it on as a winter project but it's been damn cold this year so far I may have to wait, but I'll take a couple of snaps for those that may be considering this pipe as it seems rare on Bandits. I agree with Vee, It's probably as good as any can. I think a vacuum hose from a wet/dry Vac has got to be better than the stock mid pipe. Hopefully all goes well.

broncbob · « **Reply #5 on:** January 03, 2006, 01:02:26 AM »

just put a muzzy on my 02, love it sounds great! might be a bit loud, but not to much! it's nice to be able to here the bike run! my stock jetting is off, no big suprise there, have ivans kit, now just need to get home long nuff to get it in! it seams very lean down low, and a bit off in the mid. it seams to have really woke my bike up, the front end get's a lot lighter now than with the stock pipe! can't wait to get the jet kit in! oh by the way, try to get the packing grease off the inside of the mid pipe, i didn't and it smells like ass! another thing, i wish i had done, drill the center stand stop to take the rubber bumber from the stock set up!

rider123 · « **Reply #6 on:** January 03, 2006, 04:06:28 PM »

Good to hear you like this pipe. Do you have your mixture plugs drilled? You could turn out your screws a half turn or so. Have you tried shimming the carb needles? I think Paul VS said that if you put a couple of shims on the needles it will clean up the jetting if you DONT change the stock airbox or jets. Might be worth a try as you dont have to remove the carbs to shim the needles. I was thinking of going this route untill I decided on what jet kit to get.

And I will try to get the cosmoline out of the mid pipe, thanks for the tip. It almost had more cosmoline than my chinese SKS had when I first bought it!!

broncbob · « **Reply #7 on:** January 09, 2006, 11:22:25 PM »

sorry for the long delay, i'm in canada at the moment, and have been away from the world in a man camp, no i haven't done anything but put the pipe on, it was done x mas eve, then road it for a few hours, a bit on xmas day and had to put it away! i have a jet kit, i just need the time at home to get it in! i'm sure your gonna love the pipe, it does sound great! eazy instal looks great on after you get use to the idea that the stock 55 gallon drum pipe is gone! have you put yours on yet? the stock pipe has to scale in a 15 pounds i swear!

rider123 · « **Reply #8 on:** January 10, 2006, 07:46:24 AM »

No I haven't put it on yet as my bike is stored in a garage right now for winter. I'm glad you had no hitches. Quick question, where does the centre stand stop go. The instructions seem to imply you screw it right on to the pivot bolt of the centre stand itself.

B12NScott · « **Reply #9 on:** January 12, 2006, 02:31:01 AM »

Well that thing isn't going to put itself on. Get out there and do it.

Oh.. Toronto... better turn on the heat first.

broncbob · « **Reply #10 on:** January 12, 2006, 04:30:49 AM »

it does, take old pipe off, install stop with supply'd bolt, put new pipe on! it's that easy! i would look in to drilling the new stop for the lil rubber widget that is on the old pipe. i put a new gasket in with mine, my old one could of been reused i guess but for 23 bucks us it's worth not having the problem with mine! i was just in calgary, if the wether is as nice there as it was in calgary i would of slaped it on and went for a lil ride!

rider123 · « **Reply #11 on:** January 12, 2006, 06:03:50 PM »

If you get that Ivan's kit installed can you give us an update? I'm leaning toward Ivan's jet kit for my bike as well.

broncbob · « **Reply #12 on:** January 13, 2006, 08:35:25 PM »

will do! i was hope'n to get to go home on sunday, but looks like i get stuck in oakland for a few more days! but when i get it on i'll let you know what i think of it! i'm sure it's gonna be great have not read on here anything bad about them! and from what i understand will give you help if you call him up!