performance Cams

[swagzz]

Hi All
  looking for some info on aftermarket cams for an 01 B1200
I don't want a full on race grind just  a bit more duration to let it breathe better, jet kit and bolt on pipe.
                                   Thanks swagzz
                                             
   

[RDUBandit]

You'll get more replies if you post this in the tech section, rather than the marketplace.

[txbanditrydr]

You'll get more replies if you post this in the tech section....

.... And so it's done.

Seems like I remember reading that GSXR cams are a good swap but I'll leave the specifics to more knowledgeable people than myself.

[Ranger]

Over the counter OEM GSXR cams (86 thru 90) are a pretty much drop in.

Most people run just the intake cam along with carb and exhaust mods.

[swagzz]

Thanks , I'll check this out and throw it in the tech section too.
                                             Swagzz

[Red01]

Over the counter OEM GSXR cams (86 thru 90) are a pretty much drop in.

Yup! 
Just be sure to used the Bandit cam sprockets!
The GSXR cam sprockets are different and not compatible with the Bandit (unless you're using a GSXR crank and cam chain, too).

[Blade]

I would highly recommend the 88-89 GSXR 750 intake cam and the 89 GSXR 750 exhaust cam. That is what I run in my Bandit and I also have access to OEM parts.

[swagzz]

Thanks Bill
      I'll start looking around and see what is available here ,where I,m working at the moment is a bit shy on performance places and bike wreckers.
                                                           swagzz

[Blade]

Here is a link on the install:

http://www.billsbikesnservice.com/cam.htm