« previous next »
Pages: [1]

Author Topic: Smooth bore Carbs  (Read 2609 times)

Offline b12_suzuki

  • New user!
  • *
  • Posts: 2
Smooth bore Carbs
« on: December 31, 2005, 03:01:01 AM »
I have a 2004 B12. I was wondering if anyone had replaced the stock carbs with a set of Mikuni Smooth bores or Flat Slide Carbs? How was the performance after the switch and did it cure the cold bloodiness of the bike.

Thanks for the input
Logged
2004 B1200s Bandit. OOPS  now its a 2007 B1250S Bandit.

Offline 2005B12S

  • Board Homesteader!
  • ***
  • Posts: 314
Smooth bore Carbs
« Reply #1 on: December 31, 2005, 07:01:51 PM »
BHolland uses RS38's with extensive engine mods.

I plan to go with RS36's and .360 lift cams (stock displacement) in the near future.

Good HP can be made with the stock carbs, but I feel the RS flatslides will really wake up the motor.

Ride On, Ed.
2005 GSF1200SZ
1983 GS750ED
Logged
2005 GSF1200SZ
1983 GS750ED
1992 900SS

"The quality of the kite matters little, sucess depends upon the man sitting in it" Manfred Von Richthofen

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Smooth bore Carbs
« Reply #2 on: January 01, 2006, 07:05:39 AM »
I think they're fine if you plan on going for more mods (cams, head work, higher compresion and/or bigger bore). But for something as simple as curing cold-bloodedness and/or a slip-on or header, a jet kit will be fine.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)
Pages: [1]
« previous next »