Other stock exhausts on Bandit 1250

[Ray Mooney]

Does anyone know if there are other stock exhausts that will fit the Bandit 1250? On my 2001 Bandit 1200, I ran an RF900 can with the 2" mod and Dale's jet kit. It was ALMOST a direct swap. I just had to drill another mounting hole in the RF900 can's mounting bracket. I saw a video on YouTube of a guy running a GSXR can, but I don't know how much modification was required.

[Andouille]

Here is the guy you are spedking of.  Look about half way down the page and he explains what he had to do.

http://www.twtex.com/forums/showthread.php?t=23278

I watched his video and could hear the motorcycle popping off throttle.  That would not work for me.

Tim

[rmedmonds]

I'm running one of Dale Walker's Holeshot Performance 17" street slipons.  The pipe's an easy switch--you spend more time drilling the hole & installing the centerstand stop kit that you need to get (replaces the stock stop welded to the stock muffler).  Check the site at WWW.Holeshot.com. Two Brothers and I think Yoshmira have also come out with slip-ons that should be pretty straight forward.  I'm pretty happy with the Holeshot and the they're 'good folks' .