Author Topic: Progressive Front Fork Replacement Howto (Read 10289 times)

jwalters · « **on:** March 09, 2005, 09:12:07 PM »

For the record, here is the link again to our guide.
http://genome.uiowa.edu/~jwalters/tmp/springReplacement/

jwalters and land_shark

FreediverGa · « **Reply #1 on:** March 10, 2005, 02:12:41 AM »

What if I decide not to remove the forks but suck out the old oil. Can I get away with this as long as pump the forks to get all the old oil out and I also have 600 so I simpler setup in more forks!

jwalters · « **Reply #2 on:** March 10, 2005, 10:26:08 AM »

I've never done this proceedure on a 600, but I remember others saying that you can leave the fork in the triple tree. So yes... I think that is possible.
jesse

terrebandit · « **Reply #3 on:** April 04, 2005, 10:49:38 PM »

Hey Guys! Good job on the "How To"!

Thanks!

jwalters · « **Reply #4 on:** April 04, 2005, 10:59:08 PM »

Glad, we could help! I might add some pictures to show how to replace fork seals too. All in due time!
jesse

tacoman · « **Reply #5 on:** April 09, 2005, 03:39:50 PM »

I have a B6 and would highly recommend pulling the forks. To get all the old oil out, you really need to hold them upside down and pump them. This way, you won't have any old thick oil messing up your passages. In the meantime, you can get other maintenance done like checking your brake calipers, greasing the axle, etc.

Jacknife · « **Reply #6 on:** April 09, 2005, 06:41:17 PM »

Is it the same for a b6 as for the b12? if so wont mind doing that to my front end, it now dive's a little due to double HH pads and SS brake lines.
but I do stop quicker now just need to stop the dive so much.

Red01 · « **Reply #7 on:** April 09, 2005, 08:20:04 PM »

The B6 fork is a different animal.

B6 fork internals:

B12 fork internals:

Jacknife · « **Reply #8 on:** April 11, 2005, 05:59:04 PM »

Nice one thanks, will look at this in more detail when i have more money. They get a little pissed with you if you have no money and order something around here no sence of humour

tacoman · « **Reply #9 on:** April 13, 2005, 02:34:18 PM »

The B6 forks are the old and simple damper rod, not a cartridge unit like the B12. Working on these was like going back in time, my '82 Yamaha had these. The upside is that they're easy to work on and fairly goof proof. The hardest part I had with the spring swap was putting the fork caps back on (you're compressing a spring and trying to thread the cap on fine threads).

Jacknife · « **Reply #10 on:** April 13, 2005, 06:04:58 PM »

I'll give it a go soon, got to do something its not bad but I know it can be improved!

tacoman · « **Reply #11 on:** April 13, 2005, 07:26:43 PM »

Its about a $100 for springs and fluid. Do it as soon as you can, it really changes the bike. It won't dive under hard braking and when you hit potholes, railroad tracks, etc. it won't get all bent out of shape.

Jacknife · « **Reply #12 on:** April 14, 2005, 03:57:55 AM »

Just checked my bank and I have money, and lots, have not bought anything for a few weeks, so im off to buy them!

Will let you know how they go. Might do a step by step for the 600 could be useful to others!

Vee Dub Nut · « **Reply #13 on:** April 14, 2005, 01:37:57 PM »

The previous owner changed the fluid and seals in my forks right before i bought it.. which was less than a year ago.. but used the stock springs

Is it possible to switch over to some progressive springs without having to remove the forks and do the fluid too? It seems like one could just pull out the springs and swap them out.

Thanks

Red01 · « **Reply #14 on:** April 14, 2005, 10:27:21 PM »

Adam, Ampster did just that when he put in his. See the FAQ for his write up.