Author Topic: kickstand switch (Read 3647 times)

FreediverGa · « **on:** October 29, 2005, 05:16:06 PM »

Is there anyway to by pass the kickstand safety switch so you don't have to have the switch at all ?

jeepskate99 · « **Reply #1 on:** October 29, 2005, 05:19:52 PM »

Quote from: "FreediverGa"

Is there anyway to by pass the kickstand safety switch so you don't have to have the switch at all ?

On my old bike I just cut the wires and soldered them together.

B12NScott · « **Reply #2 on:** October 29, 2005, 10:03:45 PM »

On my DRZ I just clipped and spliced together under the seat.

FreediverGa · « **Reply #3 on:** October 29, 2005, 10:19:00 PM »

ok cool that's what I'll do then!

Desolation Angel · « **Reply #4 on:** October 29, 2005, 10:57:26 PM »

Just curious...

Why bypass it?

FreediverGa · « **Reply #5 on:** October 29, 2005, 11:05:58 PM »

taking it off to go to the track!

Desolation Angel · « **Reply #6 on:** October 29, 2005, 11:06:38 PM »

Ahhhh, I see.

billster · « **Reply #7 on:** October 31, 2005, 04:33:56 AM »

I wanna take it off because it insults my experience and intelligence! Period!

Now where did I leave that damned helmet?

B12NScott · « **Reply #8 on:** October 31, 2005, 02:01:13 PM »

On my DRZ; everytime I went off a jump or hit a bump the kick stand switch would cut the engine for a 1/2 second and come back on. like a low speed rev limiter.

Mother Zuk. I haven't had that problem on my B-12. Yet...