Author Topic: New intake cams installed  (Read 4571 times)

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
New intake cams installed
« on: November 13, 2009, 05:52:05 AM »
I was finally able to get my Holeshot intake cam installed on the B12.  With much appreciation to Blade(AKA Bill's Bike N Service), I would have not been able to do the job myself.  If any of y'all are in his area, he is the type of person you want working on your bike(s).  As far as noticing a difference, I can't exactly say yet.  The next time I get out on some open ranges, I will be better able to play with it to see the difference.  What I have noticed so far is that the bike runs like a champ.  We were able to get the carbs synced as well.  On a side note, riding Bill's 1216 Bandit with FCR carbs, WOW! What a kick in the pants that is!  :iddi:  The power and torque on that thing is crazy, I want it !!!
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: New intake cams installed
« Reply #1 on: November 14, 2009, 08:55:46 AM »
let us know how it rides once you get the chance.
This is the mod I've always wanted to do.
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
Re: New intake cams installed
« Reply #2 on: November 14, 2009, 01:15:58 PM »
Will do, I should be able to find out next weekend if the weather holds out.
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
Re: New intake cams installed
« Reply #3 on: November 21, 2009, 03:09:41 PM »
Well here is the update you all have been waiting for.  My friend with his bone stock naked bandit went out with me on a run and here it goes.

Bandit 1 - bone stock w/ 47 tooth rear sprocket

Bandit 2 - Holeshot 14" low mount slip on exhaust, Holeshot stage 1 modified jet kit, Holeshot intake cam, 47 tooth rear sprocket

3rd gear roll on

Bandit 1 -
Bandit 2 - Snappier throttle response and was able to easily pull away from the stock bandit.  This is despite me having a heavier body weight.

4th gear roll on - same results

100 - 150 mph - Before adding the cam, it would pull strong to around 135 -140 mph and then creep up to around 145 - 150 mph.  Since I've added the cam, it pulls strong all the way up to 150 mph.

End result, I haven't noticed much difference in the low to mid range as advertised and I am quite happy with the results.  The bike runs like a champ and I belive the addition was well worth it.
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline mademiriam

  • Site Testing Volunteer
  • Board Homesteader!
  • ***
  • Posts: 517
Re: New intake cams installed
« Reply #4 on: November 21, 2009, 03:16:07 PM »
oh no... now i want to get one!
thanks for the update
'05 Bandit 1200, Full Muzzy, Dyno jet stage 1, 5 degree ignition advancer, Galfer SS Lines, EBC rotors, busa shock, busa forks
'03 R6 trackbike

Offline Slider

  • Board Homesteader!
  • ***
  • Posts: 162
Re: New intake cams installed
« Reply #5 on: November 24, 2009, 12:45:36 AM »
I'm just wondering if you have done an average miles per gallon study before all this. It would seem to me that changing the cam and more, would lead to fewer MPG's.

If you know your old average, I'm hoping that you would oblige with the current thirst of your new settup.

Thanks.

(too dam cold up here *&^%$#@)
Bandit 12, Yoshi can, jets, KNN, Gen Mar risers, 3 Givi 36L hardbags

Offline smooth operator

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1035
Re: New intake cams installed
« Reply #6 on: November 24, 2009, 06:31:21 AM »
  I have both the intake and the exhaust cams in mine.With the Holeshot headers and high mount can,K&N pods,advancer,stage II jetting. I'm not sure what my hp is, but it does run good. As far as gas milage,when your sucking more air,burning more fuel,you can go faster to the next station. I need gas every 100 miles. I just picked up some new throttle cables,when I put them  on,I'll try and bump my holeshot needles down a 1/2 notch and see if I can squeeze a few more mpg.

Offline solman

  • Board Homesteader!
  • ***
  • Posts: 1180
Re: New intake cams installed
« Reply #7 on: November 24, 2009, 08:33:44 PM »
I keep track on my gas mileage and I haven't noticed any difference yet other than when I am really on the throttle.
03 Naked Bandit 1200 <br />Vitamin B12, its great for the soul!

Offline Blade

  • Board Homesteader!
  • ***
  • Posts: 332
    • http://www.billsbikesnservice.com
Re: New intake cams installed
« Reply #8 on: November 26, 2009, 03:55:41 PM »
I'm just wondering if you have done an average miles per gallon study before all this. It would seem to me that changing the cam and more, would lead to fewer MPG's.

If you know your old average, I'm hoping that you would oblige with the current thirst of your new settup.

Thanks.

(too dam cold up here *&^%$#@)

With just the intake cam, you will not notice much change. At most I would supect maybe a mile or 2 per gallon. It also depend on how you ride (right hand useage).

Offline Blade

  • Board Homesteader!
  • ***
  • Posts: 332
    • http://www.billsbikesnservice.com
Re: New intake cams installed
« Reply #9 on: November 26, 2009, 03:58:59 PM »
  I have both the intake and the exhaust cams in mine.With the Holeshot headers and high mount can,K&N pods,advancer,stage II jetting. I'm not sure what my hp is, but it does run good. As far as gas milage,when your sucking more air,burning more fuel,you can go faster to the next station. I need gas every 100 miles. I just picked up some new throttle cables,when I put them  on,I'll try and bump my holeshot needles down a 1/2 notch and see if I can squeeze a few more mpg.

Hey Smooth,

Sounds like your jetting is off some. When I had the same setup, I would able to get about 140 miles out before I hit reserve. Also don't forget, mileage has a lot to do with how you are riding. If you are agressive, you will get lower mileage than if you are easy. My riding is in the middle I guess.