« previous next »
Pages: [1]

Author Topic: My Bandit Wil Not Start  (Read 3916 times)

Offline BeeBoy

  • New user!
  • *
  • Posts: 4
My Bandit Wil Not Start
« on: May 11, 2006, 10:39:51 AM »
Please help me .. My Throtle jammed which reved the engine till it cut out . After  that i could not get it to start . I swopped CDI , Rectifier,Spark plugs, checked the stator for continuity ,the coils gave me the correct readings pr/m coil 2.5 2.8 ohms  sec/coil 30 50 k ohms , but still cant get it start is anything that have to check or replace .  Please Help
Thanking All in Advance
Logged

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
My Bandit Wil Not Start
« Reply #1 on: May 11, 2006, 11:31:32 AM »
What happens when you try to start it?  Starter click?  Does it crank?
Logged
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline Brit-400

  • TURBO TYPER!
  • **
  • Posts: 24
My Bandit Wil Not Start
« Reply #2 on: May 11, 2006, 11:31:59 AM »
You getting spark and fuel? Dosent sound good that it revved till it cut out. Try a compression test.
Logged
Thanks, Toby.

This post may be beer fuelled...

Offline BeeBoy

  • New user!
  • *
  • Posts: 4
My Bandit Wil Not Start
« Reply #3 on: May 12, 2006, 07:42:13 AM »
1st of all thakx for replies :thanks:

'93 Bandit 400
I got that click sound, but swaped batteries then starter turn as normal( it Cranked).
Toby
Their's no spark,but fuell Ok.. I took Pr/Plug wire 1 ,inserted a spare plug in the socket and cranked it no FIRE ON PR/PLUG 1.
Could a Fail Safe Switch cause it ..If yes.Do I replace or reset switch.
Thanks Beeboy
Logged

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
My Bandit Wil Not Start
« Reply #4 on: May 12, 2006, 11:57:36 AM »
The safety switches, if bad, should prevent the starter from engaging, so probably not that.

Check the other plug wires for spark. 1 & 4 share the same coil and 2 & 3 share the other one. If 4 sparks, then you probably have a bad wire on 1. if 4 doesn't spark, but 2 & 3 do, you probably have a bad coil. If none of them spark, you probably have a bad ignition box.

Of course, all this assumes you have good grounds on everything and no shorted or open wires in the ignition circuitry.
Logged
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)

Offline BeeBoy

  • New user!
  • *
  • Posts: 4
My Bandit Wil Not Start
« Reply #5 on: May 17, 2006, 06:17:01 AM »
Theirs no spark coming from any of the 2 coils(from 1&4 , 2&3 . Is their any DIY method for testing the Igniter Unit .Could a faulty igniter relay cause no spark .
Thanks
Logged

Offline BeeBoy

  • New user!
  • *
  • Posts: 4
My Bandit Wil Not Start
« Reply #6 on: May 23, 2006, 09:34:48 AM »
Thanks to everyone who helped .I found the problem it was Relay 32960-33D00 Up AND RUNNING :thanks:
Logged
Pages: [1]
« previous next »