Author Topic: O-ring sizes (Read 2473 times)

Herr Tod · « **on:** June 28, 2006, 06:41:38 PM »

Once again about the infamous carb O-rings. I have measured these sizes (ID x thickness in mm):

Needle jet (emulsion tube): 10 x 1
Pilot air screw: 3 x 1
Float: 5.5 x 1.5 and 7.5 x 1.5
Membrane cover: 4 x 1

Is this correct?

NintyOne · « **Reply #1 on:** June 28, 2006, 09:20:36 PM »

Emulsion tube: 10mm X 1.5mm
Pilot air screw: didn't know there was an O-ring!
Float: 5mm X 1.5mm & 7mm X 1.5mm
Membrane cover: 3mm X 1.5mm

I hope this helps.

Herr Tod · « **Reply #2 on:** June 29, 2006, 12:46:28 PM »

Thanks! There is an o-ring for the pilot air screw in some 33 mm carbs.

Herr Tod · « **Reply #3 on:** June 29, 2006, 04:40:00 PM »

Just measured again, including the original new rings from Suzuki, and these are my definitive sizes for the 33 mm carbs:

Needle jet (emulsion tube): 10 x 1.5
Pilot air screw: 3 x 1
Float: 5.5 x 1.5 and 7.5 x 1.5
Membrane cover: 4 x 1