Speedo cable snapped on my B4

[greatmoorred]

Ive disconnected it at the clock and it has snapped about 2 inches out, so ive got the piece from the clock.
However, down at the fork end it looks like i have to take a screw out to remove the cable, but the fork is blocking the screw head.
What to do ....?

[gsxr400 racer]

forks should not be blocking, there is a notch that the speedo drive sits into on the fork tube

[greatmoorred]

Yeah, ive seen that. It doesnt really line up very well though 
I can get a small screwy on it, but its just dieing to thread the screw head, and i really dont want to do that !!

[Banditmax]

Mine fits on the same at both ends just a nut to undo.

[gsxr400 racer]

yes there are two different kinds of speedo drives

[greatmoorred]

Ok. Got the nut undone.
How do i post a picture ?
It will help me explain where i am up to.

[Red01]

Ok. Got the nut undone.
How do i post a picture ?
It will help me explain where i am up to.

The Images in posts thread is in the Site FAQ.