Author Topic: Help needed from 250/400 owners  (Read 44552 times)

Offline diesel

  • Board Regular!
  • **
  • Posts: 11
Re: Help needed from 250/400 owners
« Reply #30 on: September 29, 2008, 05:35:03 AM »
OK, so your WIKI is American only? Can you mention this on it, as it's very misleading for Bandit owners in other countries. I'm from the UK so really don't care too much about the US model history, as opposed to the global history. Especially since a lot of Bandits (Ltd edition included) were only ever Jap models. If you're only going to list US models then you need to remove the imports.

Considering Suzuki is a Japanese company and that the majority of Bandits are Jap imports it seems a bit odd to exclude Japanese models. Listing Japanese only motorcycles and giving them serial numbers that they 'may' have had,  they been released in other countries is just bizarre.

The 91 Ltd is a Jap only model, it's serial number was GSF400Z. They're the facts. Anything else relating to this bike in your WIKI is wrong and shouldn't be there.

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: Help needed from 250/400 owners
« Reply #31 on: September 29, 2008, 04:16:21 PM »
No, the WIKI isn't American only - if it was, it wouldn't include the B4 Limited, the twin disc B4's, the 2nd generation B4's, any of the 250's, any naked B6, the 2004 B6, 2005-2006 650 air-oil cooled model, naked B12's other than 2001-2003, or the 2006 B12. 

Like I said, EU uses the model year codes, too (and perhaps other world markets?)... my info source happened to use the letter codes for all Suzukis, regardless of whether this was officially used in every market or not.  You may (or may not) find the model year code info handy should you need parts from a non JDM bike to support yours.  I did go ahead and add the "Z" to the 250 & 400 Limiteds based on your input.

 :thanks:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline Guido_Brasletti

  • TURBO TYPER!
  • **
  • Posts: 33
  • Bandit 400 limited
Re: Help needed from 250/400 owners
« Reply #32 on: November 02, 2009, 04:00:08 PM »
Also the limited edition Bandit gets preload adjustment in the forks and also adjustable shock (same as the RGV250 shock?) and not only rear spring pre-load

Offline Bruce

  • New user!
  • *
  • Posts: 7
Re: Help needed from 250/400 owners
« Reply #33 on: July 06, 2011, 06:20:57 PM »
Thanks to wantone and Waruta we have some info for the 1st generation B4s.
   GSF 400 Bandit 1989-1991
[GK75A]

Battery: YTX9-BS
 
Tappet Opening/Gap: IN0.10~0.15mm, EX0.15~0.20mm
 
Front Fork Oil Volume: 545cc

Oil Level: 109mm

Main Jet: #100

Sprocket: #32.5

Plug: CR8EK
 
Chain: 525-114

The larger fork oil volume is because the forks are the longer adjustable preload ones like the some of the Limited models. I needed this info myself and am therefore extremely grateful for it, thanks guys. :thanks:

Offline canyonbreeze

  • Board Homesteader!
  • ***
  • Posts: 240
Re: Help needed from 250/400 owners
« Reply #34 on: July 08, 2011, 06:39:34 PM »
"Sprocket: #32.5"

Shouldn't that be "Pilot Jet: #32.5" ?

Offline Bruce

  • New user!
  • *
  • Posts: 7
Re: Help needed from 250/400 owners
« Reply #35 on: July 09, 2011, 09:42:15 AM »
canyonbreeze, I think you're right there it should be pilot jet. Same size as UK spec in my manual. Sprocket would be number of teeth, surely? I'm hoping ChrisH will upload the Japanese manual. :grin:

Offline Squishy

  • Board Homesteader!
  • ***
  • Posts: 417
Re: Help needed from 250/400 owners
« Reply #36 on: October 09, 2011, 06:23:13 PM »
Not sure if this is still used/updated but my 92 GSF400 has a 16L tank including a 3.5liter reserve, not 1.5liter

Offline banditv

  • Board Homesteader!
  • ***
  • Posts: 66
Re: Help needed from 250/400 owners
« Reply #37 on: February 22, 2012, 01:09:01 AM »
the gj77a ( 250v ) uses tokico 2 piston caliper and single piston rear. 310 mm front rotor.
and i did read somewhere that after 95 the japanese govt through out the 40 hp limit and they went back to bout 45hp.