Author Topic: sprockets and tires  (Read 6564 times)

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
sprockets and tires
« on: March 11, 2010, 02:51:55 PM »
I have a 93 bandit 400. I replaced the chain last october but they said the sprockets should be replaced also. I just want to confirm that i need a 14t front and 46t rear.

Also im thinking of getting some shinko 006 tires since mine are from 01. its 110/70-17 front and 150/60-17 rear? I see the faq says 160/60. I know i had 110/80 and 160/70 on there now.

Going to order some cr8e spark plugs also. Is it better to turn the carb then change the plugs? I got it started the other day and it had no idle just like last time i ran it.  Granted it has been all winter and I'm sure it needs a drive to really see how its doing.


Offline Ken Hill

  • Board Regular!
  • **
  • Posts: 11
Re: sprockets and tires
« Reply #1 on: March 11, 2010, 06:05:46 PM »
Tire sizes are 110/70 front, 150/60 rear. Your gearing is right, I think they went to 46 on the rear in 93, 91-92's were 47, I'm running a 50 on the rear but it's a race bike. If it won't idle the pilot jets are plugged, the holes in these are tiny, first thing to varnish up when you don't put fuel stabilizer in it in the fall like you should. Only sure fix is pulling the carbs and giving them a cleaning.

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #2 on: March 11, 2010, 06:19:11 PM »
i ran a can of sea foam through a tank then refilled and added stabil and ran it before storage.  I really dont want to tear into the carbs because the last owner just did a dyno jet kit in june in it so they should be clean.

im going to drain the tank and carbs and petcock. I cant say there isnt stuff in there. I see if that helps.

thanks for the tire and sprocket info. Now i just need to order and find time to put them on.
« Last Edit: March 11, 2010, 07:02:06 PM by fireburster »

Offline crashoverrideplik

  • Board Homesteader!
  • ***
  • Posts: 57
Re: sprockets and tires
« Reply #3 on: March 25, 2010, 01:27:41 PM »
I'd avoid Shinko's (or stinko's as we refer to them) like the plague. They simply suck! Scotch tape has more grip then they do.  If money is the issue, I understand but you get what you paid for.... They gave me a set to test as a promo and I think I rode on them for 100 miles before attempting to cut them off my rims, they sucked that bad. I run Pirelli Diablo Super Corsa's on my bikes. Yes, they are expensive but nothing grips like them.

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #4 on: March 25, 2010, 01:30:16 PM »
I searched here and lots of positives about them. I just drive to work and back 2 miles. Im not carving up any roads like most. Just a commuter.

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: sprockets and tires
« Reply #5 on: March 25, 2010, 03:13:52 PM »
Im running 14/47 and always thought the tyres were 110/70H and 150/70H.

Offline crashoverrideplik

  • Board Homesteader!
  • ***
  • Posts: 57
Re: sprockets and tires
« Reply #6 on: March 25, 2010, 03:20:29 PM »
I searched here and lots of positives about them. I just drive to work and back 2 miles. Im not carving up any roads like most. Just a commuter.

In that case they are Ok. I ride my 400 like I stole it so handling is most important to me.

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #7 on: April 13, 2010, 03:23:27 PM »
youll be happy to know i ordered some power pilots since everyone on here loves them. They were on sale so i did it. Hoping to install them myself this weekend if they ship in time.

Offline gixxerjasen

  • TURBO TYPER!
  • **
  • Posts: 45
Re: sprockets and tires
« Reply #8 on: April 13, 2010, 06:51:09 PM »
Anybody run the PR2's on their Bandits yet?  I ran one on the rear of my FZ1 and was VERY happy with the grip level and the mileage.  I see they only come in a 150/70 rear though.

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
Re: sprockets and tires
« Reply #9 on: April 14, 2010, 11:27:48 AM »
I'd avoid Shinko's (or stinko's as we refer to them) like the plague. They simply suck! Scotch tape has more grip then they do.  If money is the issue, I understand but you get what you paid for.... They gave me a set to test as a promo and I think I rode on them for 100 miles before attempting to cut them off my rims, they sucked that bad. I run Pirelli Diablo Super Corsa's on my bikes. Yes, they are expensive but nothing grips like them.

Really?  I've never heard anyone say a negative thing about Shinkos.  On of Bandit Alley's longest running threads is all about loving Shinkos.  I have a couple friends running them, even on the track and they're happy with them.  I wouldn't hesitate to give them a shot.
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #10 on: April 14, 2010, 11:36:53 AM »
i thought people liked the shinkos and i would have gone with them bit the pp were 187 shipped off motorcycle superstore on sale. thought for 40 more buts id get them. Ill try shinkos next time when i don't have cash from selling my scooter.

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #11 on: April 14, 2010, 05:53:37 PM »
what front back pressure for the pp are you guys running?

Offline Guido_Brasletti

  • TURBO TYPER!
  • **
  • Posts: 33
  • Bandit 400 limited
Re: sprockets and tires
« Reply #12 on: April 15, 2010, 04:26:33 AM »
Im running 14/47 and always thought the tyres were 110/70H and 150/70H.

150/70H is the tyre size according to the manual. However I also wear 150/60 on mine with one tooth smaller sprocket on the rear.

Choosing to put 150/60 means since the rear wheel is slightly smaller, the gearing should be longer if you want to have (roughly) the same rpm for the same speed.

150/60 are usually sportier/softer tyres than the 150/70

Offline fireburster

  • Board Homesteader!
  • ***
  • Posts: 69
Re: sprockets and tires
« Reply #13 on: April 15, 2010, 11:41:59 AM »
dang i know i looked on the faq here and swear is said 150/60. Now i wish i would have really looked at it. Im 6ft i could use the height, feels little small sometimes.  Just had a hard time finding a set that was 110/70 150/70 in my price range.

Offline gixxerjasen

  • TURBO TYPER!
  • **
  • Posts: 45
Re: sprockets and tires
« Reply #14 on: April 15, 2010, 01:34:45 PM »
Interesting, sure enough right there in the owners manual (downloaded from here, thanks!) it shows 110/70 and 150/70.  I might have to give the Pilot Road 2's a whirl on the Bandit.  I mean, I know guys getting 9000 miles out of a rear on the bigger sport bikes.  I got really good mileage on my FZ1 but didn't get a chance to run it completely out.  And the grip was quite good as well.