Author Topic: Sparkplug gap??? (Read 9730 times)

lharrell79 · « **on:** September 25, 2005, 12:11:14 AM »

Need to change the plugs on the 98 bandit 600 I just picked up. Can anyone with a manual tell me what the stock gap is? I'm planning on putting in cr9ek's.

Lucas

WEINERDOGBONE · « **Reply #1 on:** September 25, 2005, 05:46:41 AM »

My Hanes manual says 0.6 to 0.7mm for the 600. If my math is right that is .023 to .027 hundredths.

lharrell79 · « **Reply #2 on:** September 25, 2005, 11:32:01 AM »

Much appreciated.

Lucas

Red01 · « **Reply #3 on:** September 25, 2005, 03:58:27 PM »

Quote from: "WEINERDOGBONE"

My Hanes manual says 0.6 to 0.7mm for the 600. If my math is right that is .023 to .027 hundredths.

0.6mm = 0.02362198 in
0.7mm = 0.02755897 in

So, if you're using feeler gauges, I'd go with 0.024 - 0.028

WEINERDOGBONE · « **Reply #4 on:** September 25, 2005, 06:47:54 PM »

Thanks Paul. I defer to the master tech.

Red01 · « **Reply #5 on:** September 26, 2005, 02:44:31 PM »

I dunno bout that, but I am the guy with the CONVERT.EXE program.

PitterB4 · « **Reply #6 on:** September 26, 2005, 02:54:16 PM »

Quote from: "Red01"

I dunno bout that, but I am the guy with the CONVERT.EXE program.

Cheater!!!

Red01 · « **Reply #7 on:** September 26, 2005, 03:03:48 PM »

Let it be known I am NOT beyond using the nearly infinite resources available on the web.

I learned a long time ago it's not what you know, it's knowing where to find it.