Author Topic: Is the 650 an O or X ring chain?  (Read 3755 times)

Offline MaxBandit

  • Board Regular!
  • **
  • Posts: 18
Is the 650 an O or X ring chain?
« on: May 24, 2009, 05:22:26 PM »
I apologise for all the stupid questions but is the chain on the 2008 GSF 650 K8 an O-ring or X-ring chain?

I only ask because because I need to clean and lube my chain for the first time and I read you can only lube the side plate of the chain on O-ring chain but with X-ring chains you need to lubricate each part of the chain a lot more often.


Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: Is the 650 an O or X ring chain?
« Reply #1 on: May 25, 2009, 12:17:22 AM »
Lube it all... keep it clean.

Not much difference between the two chain types IMHO... both use an o-ring to supposedly hold grease inside the rollers.  Cleaning prevents sand/grit/dirt from degrading the o-rings.  That's why I believe chain lube that flings off is a good thing - carries away some of the crap between cleanings.

To answer your question... I can't say for sure but knowing Suzuki it's an o-ringer.
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!