Author Topic: fancy plastic fork protectors (Read 4075 times)

the kid · « **on:** October 09, 2005, 11:08:01 PM »

were can i get a set of thoses fancy black fork procters the black one there for a 96 b6 thanks

turbo-bob · « **Reply #1 on:** October 09, 2005, 11:13:22 PM »

Quote from: "the kid"

were can i get a set of thoses fancy black fork procters the black one there for a 96 b6 thanks

The Dealer

Then take your front end apart to install them.

Red01 · « **Reply #2 on:** October 09, 2005, 11:35:24 PM »

You could ask Dale if these can be adapted to work on the 1G B6:
http://www.holeshot.com/bandit/fork_protectors.html

PeteSC · « **Reply #3 on:** October 10, 2005, 12:31:57 AM »

I bought the ones I have on my '99 B12 from a local Triumph dealer.
http://forums.banditalley.net/viewtopic.php?t=344

At that time, they were the same thing Dale was selling, and a little cheaper.
I'd measure the diameter or your fork tube, and go to a large dealership and see if any new bike has fork protectors that will fit.
You didn't have to dissassemble your forks to put mine on.....took 10-15 minutes. They're plastic, and if I remember correctly, you just spread them a bit to slip them on, then insert the clamping bolt.

There are also some stainless fork protectors that may fit a b6.

aussiebandit · « **Reply #4 on:** October 10, 2005, 03:11:25 AM »

There's an aftermarket mob here called KBC (I think) and they've got some that are carbon fibre or at least carbon fibre looking.

Just make sure you get the right ones. We got some for the treasurers M750, but she's got upside down forks, and the ones we got just don't fit.

wizud · « **Reply #5 on:** October 10, 2005, 09:00:14 AM »

I put the Triumph ones on mine. It took ten minutes and they fitted perfectly except for hitting the horn on full compression .Quick fix was to reverse the horn bracket

ratbike05 · « **Reply #6 on:** October 10, 2005, 05:35:37 PM »

I was looking for the fork protectors myself and the website I found it on, sorry I can't remember the name of it, said that the triumph would fit and gave part number A9641005.

Slonishku · « **Reply #7 on:** May 02, 2006, 02:49:08 AM »

I used the Triumph ones too. Ten minute install. Woulda been quicker had I not been having a beer and a smoke during the install...

ratbike05 · « **Reply #8 on:** May 02, 2006, 01:30:11 PM »

I finally got around to getting them and they look good. They are a bit taller than the ones for the B12 from Dale.