Author Topic: The 2 best places for jet kits, and exhausts....  (Read 42468 times)

Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: The 2 best places for jet kits, and exhausts....
« Reply #15 on: November 18, 2007, 11:46:58 PM »
Ivan is an old friend of mine; I live near him in Rockland County, NY. He's somehwat of an odd dude at times, but very fussy about getting things done right, and a good guy overall. I have his needles in my current '98 B12, and highly recommend.
I'm running a Yosh RS-3 end can, stock paper filter (never had luck with K&N's over years/bikes).. stock pilots.. and I think I'm one size up on the mains (I forget and I'm out on business in China now). The key thing was getting the needles and fuel-screws to jibe. As I remember (ah, sh*t), I think I was pretty wide with the fuel screws and somewhere in the middle of the needles. [How's THAT for helpful?? When I get back I'll post my exact settings.. which I've used for both my 1st Gen B12's to good effect].
Don't forget to drill 15 1/2" holes in the top/back of your airbox, and chuck out the snorkel.
PS... my B12's have been NOTORIOUS for running crappy when the air filter gets even slightly dirty (you often can't tell by looking). This just might be due to my tuning..
Anyway, the Black Bastid runs great, no flat spots right to redline.
Suggestions welcomed!
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

Offline CWO4GUNNER

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1199
    • GUNNER G. CWO4 WEPS USCG Retired
Re: The 2 best places for jet kits, and exhausts....
« Reply #16 on: November 19, 2007, 01:47:57 PM »
Great to hear Ivan's products are working for you, they certainly worked in my 05 B1200, easiest plug and play full carb/airbox/exhaust mod I ever installed.
No suggestions but do have a request. If you really live close to Ivan and he's your friend, for all of us here with B1250's, next time you see him ask him when if ever is he going to come out with remapping and uncorking mods for the B1250 as it would be great to have more then one source of supply.

Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: The 2 best places for jet kits, and exhausts....
« Reply #17 on: November 19, 2007, 10:06:22 PM »
Re: Ivan, un-corking / re-mapping mods, B1250. I'm currently in China, but I just dropped him a phone message five minutes ago and suggested it to him. I'll be back in New York around Christmas, and will go see him then, as I want to upgrade my 1st Gen B12.

In terms of such, what have you guys got for recommendations in terms of SOFT engine mods? I'm considering a bore kit and some light head work... I need to keep the motor flexible and reliable (especially if caught in summer traffic jams).. but I'm looking for more OOMPH.
Whaddyas think? 1216 kit (Wiseco??) and some port-polishing do it? How far can I go before I run into heat / wear problems?

-----
"tighten it 'til it loosens, then back-off a quarter turn"
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: The 2 best places for jet kits, and exhausts....
« Reply #18 on: November 19, 2007, 10:26:09 PM »
JE has a better rep that Wiseco for the SACS motors from what I hear.  APE Racing and Holeshot have JE pistons for the B12.  (APE also sells Wiseco.)  The Holeshot 1216 JE kit has lower compression (10.8:1) than the off-the-shelf JE 1216 pistons APE sells (13:1), so for a street bike, it might be more of what you're looking for.  1216's live just fine on the street, 1246's will work OK too - but you may want to avoid slow moving in hot weather.  Hopefully BHolland will weigh in on this one since he runs a 1246.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline China Greg

  • Board Homesteader!
  • ***
  • Posts: 194
  • Tighten it 'til it Loosens then back-off 1/4 turn
Re: The 2 best places for jet kits, and exhausts....
« Reply #19 on: November 20, 2007, 02:00:16 AM »
Dy-no-MITE, Red. Well appreciated.

What about headwork? Any thoughts/wisdom on that front?

"BHolland.. paging Mr Holland.."

PS... anyone know how to post a PHOTO here? [Duhh..]
I'd love to show off the Midnight B12.
Black '98 B12S, JE 1216cc bore kit, port work, Yosh RS3, Ivan jetting, drag bars, modified Corbin Gunfighter, Hyperpro shock, Racetech Gold valve kit, stainless lines, Wave rotors, polished wheels, fender eliminator, bar-end mirrors, NEP throttle lock, Adaptiv TPX radar detector...140K miles

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: The 2 best places for jet kits, and exhausts....
« Reply #20 on: November 20, 2007, 09:43:46 AM »
Dy-no-MITE, Red. Well appreciated.

What about headwork? Any thoughts/wisdom on that front?

"BHolland.. paging Mr Holland.."

PS... anyone know how to post a PHOTO here? [Duhh..]
I'd love to show off the Midnight B12.

For posting photos, read this thread.

For headwork advice, talk to Dale Walker @ Holeshot, the folks @ APE, and/or contact our member, Fast Larry, and see if his friend, Katana John, is still doing headwork.  Plus anything Mr. Holland might have to add.  :bandit:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline B6mick

  • Board Homesteader!
  • ***
  • Posts: 1344
Re: The 2 best places for jet kits, and exhausts....
« Reply #21 on: February 25, 2008, 02:25:45 AM »
2 words, for jet kits, and after the research I've done. And advice from Dynotuners and race teams.

Factory Pro.
Foot loose and fancy free.
Looking for adventure and what ever comes our way.

Offline GETFURIOUS

  • CAPS LOCK IS STUCK
  • Board Homesteader!
  • ***
  • Posts: 181
Re: The 2 best places for jet kits, and exhausts....
« Reply #22 on: March 28, 2008, 01:33:29 AM »
2 words, for jet kits, and after the research I've done. And advice from Dynotuners and race teams.

Factory Pro.

THIS MAY BE A STUPID QUESTION.....BUT WHAT IS FACTORY PRO?....
2001 BANDIT 1200S - MY DOCTOR ALWAYS SAYS, TAKE A SHOT OF B-12 AND CALL ME IN THE MORNING!  I LOVE MY DOCTOR!

W-T-B - AFTERMARKET CHROME/POLISHED WHEELS-LIKE THESE-http://www.exoticsportbike.com/star2.htm

Offline B6mick

  • Board Homesteader!
  • ***
  • Posts: 1344
Re: The 2 best places for jet kits, and exhausts....
« Reply #23 on: March 28, 2008, 02:54:57 AM »
2 words, for jet kits, and after the research I've done. And advice from Dynotuners and race teams.

Factory Pro.

THIS MAY BE A STUPID QUESTION.....BUT WHAT IS FACTORY PRO?....

Fractory Pro is the company name.


http://www.factorypro.com/products/carb.html

http://www.factorypro.com/index.htm

« Last Edit: March 28, 2008, 06:51:52 AM by B6mick »
Foot loose and fancy free.
Looking for adventure and what ever comes our way.

Offline gyrogearcrunch

  • Board Homesteader!
  • ***
  • Posts: 211
Re: The 2 best places for jet kits, and exhausts....
« Reply #24 on: April 14, 2009, 01:40:23 AM »
what about us Eurotrash?

You can be your own best friend when it comes to tuning a bike by learning everything that relates to the topic of carb/FI tuning. Relying on "experts" will leave you wondering whether or not you did the right thing, and will do nothing to educate you on tuning an engine yourself. However, it will help impoverish you and enable your "expert" to drive a better car than you do. Self-education is the surest way to eventual satisfaction - there is no short-cut or substitute.

Offline gyrogearcrunch

  • Board Homesteader!
  • ***
  • Posts: 211
Re: The 2 best places for jet kits, and exhausts....
« Reply #25 on: April 17, 2009, 12:23:53 AM »
what about us Eurotrash?

Er, you have to get after the Euro Banks to quit screwing over us pore "Murray-kans" with demands for direct bank transfers. This removes all protections for the seller on the west bank of the Hatlantic Hocean. You want our goodies? Then insist on a few rule changes regarding what's acceptable payment. Deal with us on a credit-card basis by making payment from American credit-card companies acceptable in Europe. Insist, through your so-called representatives (ours are no better than yours), that all credit cards must be accepted worldwide. Anything less is a restraint of trade! Screw PayPal! They are just an integral component of the worldwide control system (why else did you think we were allowed to have computers?).

Snerd rules!

Offline gyrogearcrunch

  • Board Homesteader!
  • ***
  • Posts: 211
Re: The 2 best places for jet kits, and exhausts....
« Reply #26 on: April 12, 2010, 11:22:36 AM »
Quote from: chupacabra
Drill out the air/fuel screw caps and set the screws to 2.5 turns out (may have to turn them out a little more for best tune) . Mine were set bad at the factory, from almost closed to two turns out. Set them all the same. Then get some washers from radio shack and shim the needles. I'd just get two #100 main jet and put them in 1 and four, two and three have 100's already. That will cost you about $20 for the two jets and bag of washers.

Thats just my 2cents,....hope it helps
-----------------------------------------------------------
Pretty sad that your bike came with those crummy settings! But, what the hey - we can feex them, no? You seem to have a running start on this problem already.

------------------------------------------------------------
Thanks for the reply.

You never know what you'll find when you dig into your bike's guts, especially if it wasn't bought new, like my 1999 1200. It really does pay to do the work yourself, if you're at all mechanically inclined and have lots of time and a second bike.

I went so far as to remove the carbs and attempted to clean them with a spray cleaner, but failed to do the long soak in NAPA #6401 (the really nasty stuff), so it didn't work. Trying to get the bike running for a visiting son-in-law, I got a Holeshot Stage I jetkit, with the K&N Filter and 5 deg. advancer, and had a dealer install the works. I cut the 2" square hole in the aircleaner myself, and used RV roof sealant to stick flyscreening over the two holes to keep stuff out of the airbox.

Dale Walker Holeshot) included only those items in his kit that he felt would work best with a stock exhaust manifold and mid-pipe, plus a Yoshimura RS-3 Can and the 2" square aircleaner hole (Yes, I talked with him before ordering). The torque on this '99 1200 is now even more amazing than it was 9 years ago. THANKS, DALE! You helped make all the difference in the way the old 1200 behaved.

----------------------------------------------------

(Original posting follows)

Just for the record, the '99 B12 came with the following size jets: Main: #102.5, Pilot: #37.5, Pilot screw: "Pre-Set" (whatever that means). Having done some rejetting before, it turns out that these jet size specs are just "jumping-off" points (baseline settings) and there's usually a lot to be gained by the do-it-yourselfer in the way of HP, economy, and rideability. Mikunis are easy to work on and parts are readily available. Good books are also available on Mikunis.

Since the engine runs lean on both ends of the RPM spectrum, it pays to retune for better rideability by correcting the A/F ratio off idle with the pilot screws and by trying different pilot jet sizes and by improving the air and fuel delivery at the high end, starting with a Pingel shutoff valve in the tank. The stock shutoff doesn't flow enough at high RPM's. Then make sure there's enough air up there as well by yanking out the snorkel and/or making the 2"x2" mod to the airbox (pod filters look cool but aren't so great in the rain). If all this is done right, you probably won't need the Radio Shack washers.

You suggest using the same main jets on all 4 carbs. I seem to get better results by making the center cylinders one jet size bigger (richer) since the centers on air-cooled engines run hotter than the outer cylinders. You may want to experiment by buying 3 different sets of mains, starting with the size just above stock and getting bigger.

While an air/fuel meter would be nice, I want some day to get a set of thermocouples and a 4-channel meter so I can do some dynamic testing of the exhaust gas temps. Using EGT's would allow me to rejet until each cylinder is delivering the same torque under WOT. It's also possible to compensate for mechanical and wear differences this way on older engines. There's a few tenths to be gained there, I think. The idea is to get all four cylinders to do the same amount of work.

Anyway, I'm prolly preaching to the choir here. Good luck!

Herb

Offline chiral

  • New user!
  • *
  • Posts: 8
Re: The 2 best places for jet kits, and exhausts....
« Reply #27 on: August 14, 2013, 01:57:49 AM »
So what are the jet sizes / part numbers used in the holeshot stage 1 kit?

According to this trusted site,

http://www.portablepct.com/fastlarry/banditfaq.htm#fuel_system

 the shim sizes are the same as stock. I already have a high flow filter and aftermarket exhaust. I'm not looking to question the quality of the holeshot kit, but I really only want to change my main and pilot jets right now .. can anyone offer some info?